Grouting Compound We manufacture good quality of Grouting Compound and it used for farious grouting application. A FREE FLOWING NON SHRINK HIGH STRENGTH WHITE GROUT PRIMARY USES Perma Grout-60 White is used for:- 1. Grouting heavy machine foundations which are subjected to huge dynamic loads. 2. Grouting underneath base plates of machines. 3. Grouting of columns / stanchion foundations. 4. Grouting of crane rails, anchor bolts, dowel bars etc. ADVANTAGES 1. High early and ultimate strength: Perma Grout-60 White achieves a compressive strength of over 300 kg/cm 2 in 24 hours and strengths in excess of 600 kg/cm 2 in 28 days. 2. Non shrink and Expansion: Perma Grout-60 White is expansive. it exhibits an expansion of about 4% in plastic state and 0.2% in hardened state. Hence the chances of shrinkage of grouting material do not arise. 3. Free flowing and self Levelling: Perma Grout-60 White is free flowing and self levelling: It occupies voids and recesses without the need of any tamping or vibration. The product can also be pumped. 4. Safety in use: Perma Grout-60 White is free from any added chlorides, sulphates, nitrates and any ferrous materials. DIRECTIONS FOR USE 1. Clean the foundation surfaces to be grouted so that they are free from dust, dirt, oil, grease, curing compound, paint etc. 2. Make the surface wet and avoid stagnation of water in the recesses. 3. Mix Perma Grout-60 White with water as per the ratios mentioned with properties above to form a smooth consistency mortar or slurry. Lower the water content higher will be the strength. 4. Pour Perma Grout-60 White mortar or slurry in the pocket or recess to be grouted. After initial hardening cure by placing wet hessian over it.